Standard 40mm Lift top Kit for 1/10 Scale CEN Racing F450 (truck not included-lift kit only)

Finally, a way to lift your CEN Racing F450 and fit MASSIVE tires. This does NOT include the truck or any tools to install. It is a 3/10 on the difficulty scale and requires no special tools beyond a 2mm hex wrench. Comes with all necessary hardware to bolt on and should take less than an hour.

Highlights:

Fits up to 5.4" tires (and maybe beyond). The truck in the photo is utilizing Proline Carbine 1.9" dually wheels wrapped with 5.4" Proline Boggers.
Completely Bolt on. No cutting, sanding, bending, grinding at all. A 2nm hex wrench and an hour and you truck will look like the one in the photos.
Made of PETG and overbuilt. These parts are tough. I can stand on this chassis without axles and not break these brackets, and I'm 200 lbs.
All stock geometry preserved. Sway bars preserved front and rear. This kit moves the ENTIRE driveline down 40mm. This means the motor, transmission, axles, 3 links and panhard links all move down front and rear. The steering servo also moves down. This keeps the driveshafts from falling out and also keeps the panhand and steering geometry intact. Far better than just sticking longer shocks and hoping for the best.
Improved handling VS just longer shocks, lower CG

Reuse the stock 78mm shocks and bolt them directly to the chassis rails or opt for 120mm shocks and mount them in the stock locations (travel limiters recommended to keep the axles from making hard contact with panhard/chassis/links etc).

90mm(trx4) shocks at the chassis and 130mm(proline big bore) mounted to the stock shock hoops have been tested and work well. 90 or 130mm will lift the truck 50mm over stock.

100 and 110mm shocks have not been tested and are not recommended unless you like to get creative with installs. These shocks will cause driveline issues just as they would on the completely stock truck.

Removable "CNC" logo plate in main drop brackets. You can choose to show off our brand or go more subtle, up to you! Logo plate will come in a contrasting color.

Parts included:
Main Chassis drop transmission/motor and link mounts X2
Steering top servo and front panhard drop bracket X 1
Rear panhard drop bracket X 1
"CNC" Logo insert X 2 (re-use transmission cross brace bolts to install, if desired)
Swaybar links M3 40mm standoffs X 4
Shock Mounts 20mm M3 x 4
Drop Bracket bolts Upper 14mm M3 X 16 (Upper Chassis Main Bracket Bolts)
Drop Bracket bolts Lower 16mm M3 x 14 (Lower Drop Bracket Bolts)
M3 Nut x 13 (4 mount behind shocks if mounting directly to chassis)

Please see my YT channel for a brief overview:

https://youtu.be/2DQmzWjckk8

This kit does NOT come with written instructions. Please see video instructions here: https://youtu.be/XvHNFipjdG0

Three colors being produced. All black. Black with Grey Main Frame Brackets. Black with Red Main Frame Brackets.